Latest tar felting Tenders | Government tar felting Tenders

CTN :45451293

19 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For providing of facility management services - lumpsum based - tar felting of 05 nos nishan sheds construction of storage racks and boundary wall height raising at electricity store centre lesa lucknow ahibaranpur; civil works; consumables to be provided by service ..

State Government

CTN :45424970

25 Jun, 2026 1.08 Lacs

Raipur - Chhattisgarh

Tender For tar felting work over leaking asbestos roof at zone office building power house bhilai.

CTN :45420727

24 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of asbestos cement ridge for fully corrugated roofing sheet

State Government

CTN :45411968

24 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm thick factory ma

CTN :45364762

24 Jun, 2026 NA

Multi City - Multi State

Tender For supply of colored corrugated gi steel sheet (roofing sheet)

CTN :45326613

10 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of sky blue semi corrugated ppgi roofing sheet

corporations/Associations/Others

CTN :45259055

29 May, 2026 9.46 Lacs

Navsari - Gujarat

Tender For corrigendum : providing & fixing corrugated g.i. sheet roofing on 132 kv cr building at 132kv atul ss dist. valsad under navsari tr circle.

State Government

CTN :45230618

08 Jun, 2026 40.00 Lacs

Bharuch - Gujarat

Tender For supplying and stacking various type building,road and other construction materials at various places of taluka jhagadia under taluka panchayat jhagadia,dis:bharuch under mgnrega (annual unit rate) - supplying and stacking cement(i.s.1.53gradeopc) , white cement, , coarse sand, , 5.0k.m., , 05km -10km, , 10km -15km, , 15km -25km, , 25km -50km, , 50km -100km, , fine sand, , 5.0k.m., , 05km -10km, , 10km -15km, , 15km -25km, , 25km -50km, , 50km -100km, , supplying and stacking brick aggregate 40 mm size, , 5.0k.m.lead, , 05km -10km, , supplying and stacking, , 5.0k.m.lead, , 05km -10km, , supplying and stacking common burnt clay bricks conventional, , 5.0k.m.lead, , 05km -10km, , common burnt clay bricks conventionalize, , 5.0k.m.lead, , 05km -10km, , supply in gand stacking fly ash brick, , hand broken stone aggregate 25mm ciza to 90mm ciza, 5.uk.m., , 05km -10km, , 10km-15km, , 15km -25km, , 25km -50km, , 50km -100km, , crushed stone aggregate for hard quality 10 to 20mm size, , 5.0k.m., , 05km -10km, , 10km -15km, , 15km -25km, , 25km -50km, , 50km -100km, , crushed stone aggregate for hard quality 40mm size, , 5.0k.m., , 05km -10km, , 10km -15km, , 15km -25km, , 25km -50km, , 50km -100km, , crushed stone aggregate for hard quality 40mm to 63mm size, , 5.0k.m., , 05km -10km, , 10k.m. -15k.m., , 15km -25km, d, , steel hysd, , battens75mmx100 mm, , binding vires, , c.i.cover with frame, , c.i.cover with frame, , common burnt claybricks, , modular size 20x10x10 cm, , corrugated a.c.sheet 6mm thick, , distemper primer, , dry distemper, , enamel paint, , enamel primer, , flat back wash basin colour glazed 450x300 size, , g.i sheet 0.8mm thick, , g.i sheet 0.8mm thick semi-, , circular class-3, , g.i.barbed wire, , g.i. j or l hooks, , gun metal screw down bib tap-, , gun metal screw down bib tap-, , gun metal wheel valve15 mmdia, , gun metal wheel valve 20 mmdia, , gun metal wheel valve 25mmdia., , oil bound distemper, , p.v.c bib tap 15mm.dia, , p.v.c bib tap 20mm.dia, , plastic emulsion paint, , polished kota stone slab green.30mm thick, , polished kota stone slab green.40mm thick, , pre-cast cement concrete tiles, , precast rcc jali 25mm thick, , precast rcc jali 40mm thick, , precast rcc jali 50 mm thick, , precast rcc jali 75 mm thick, , bcc han nuts non-praccura, d, , pvc svr pipes is1 3592 for drain -160mmdia, , pvc svr pipes is1 3592 for drain -75 mmdia, , pvc svr pipes is1 3592 for drain -90 mmdia, , pvc svr coupler110mm dia, , pvc svr coupler 75mm dia, , pvc svr single t-75mm dia", , pvc svr single t-110mm dia", , anodised aluminum butt hinges 75 mm x63 mm x 3.2 mm, , anodized alluminium section 63.50 x 38.10 x 1.2 mm @ vt., , glzed tiles piece wastage., , paver block m200 grade 60mm, , paver block m250 grade 60mm, , polycarbonate multiwall roofing, , pvcwater tank, , wall primer of approved brand, , 15mmdia.u.p.v.c. 40) length12.0mt pipe ((sch-, , 25mmdia.u.p.v.c. pipe ((sch-40) length12.0mt, , 32mmdia.u.p.v.c. pipe ((sch-40) length12.0mt, , 50mmdia.u.p.v.c. pipe ((sch-40) length12.0mt, , solution 50 ml adhesive solvent, , light weight calcium silicate tegular edged 595x595 modular acoustical celling tiles with 15 mm thick densified edges jcb, , angle iron 40x40x6, , c pvc pipe sdr 13.5-15mm diameter (1/2)", , c pvc pipe sdr 13.5-20mm diameter (3/4)", , c pvc pipe sdr 13.5-25mm

Central Government/Public Sector

CTN :45089619

22 May, 2026 15.24 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : tar felting of 03 nos. draglines and roof sealing and tarfelting of 03 nos. er shovels (02 nos. be-195b and 01 no. pnh-1900al) of khadia project.

CTN :45094891

08 Jun, 2026 10.00 Lacs

Satna - Madhya Pradesh

Tender For supply of nirman samgri - jcb machine on rent (including diesel and driver); crushed metal 10mm; crushed metal 20mm; crushed metal 40mm; quality gravel; kiln-fired bricks; sand; murrum (red gravel); stone dust; 6mm metal; sand washing/processing; complete structural steel work; pvc pipe 4"; pvc pipe 6"; pvc pipe 8"; indian-style latrine seat (580x500mm); complete urinal unit; european-style latrine seat (western-style) with 10-liter flush tank; road roller on rent (including diesel and driver); iron reinforcement bars (sariya); marble stone; marble stone engraving/writing work; granite stone; ppc cement (grade 43); rcc hume pipe 300mm np-3; rcc hume pipe 450mm np-3; rcc hume pipe 600mm np-3; rcc hume pipe 900mm np-3; rcc hume pipe 1000mm np-3; iron angles; chain-link fencing fabric (50x50mm mesh, 4mm wire); chain-link fencing fabric (50x50mm mesh, 3mm wire); corrugated steel sheet (g.i., 0.80mm thick); corrugated steel sheet (g.i., 0.63mm thick). corrugated asbestos cement sheets (0.80 mm thick; 6' x 8'), including g.i. j-bolts and l-hooks; stone aggregate (20 mm); paver blocks (magnet smooth finish) 80 mm; paver blocks (magnet smooth finish) 60 mm; rcc pole (7 feet high) with fixtures; white cement (jk white); paver block fixing; sheet metal roofing; poling machine (with fuel and operator); indian-style toilet seat (with 10-liter flush tank); aluminum section work; glasswork within aluminum sections; tractor-trolley (with fuel and operator); dumper (with fuel and operator); precast boundary wall; precast pole (2.0 meters high) for wall; wall tiles; kota stone work; soil.

Tar Felting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector